Abstract
In recent years, organic-inorganic hybrid perovskite materials have become one of the most promising materials in the new generation of solar cells. These perovskites can provide excellent photoelectric properties after a simple fabrication process. Although perovskite solar cells have achieved high power conversion efficiency, instability concerns regarding material exposure to heat, moisture, air, and UV light present hindrances to commercialization. In this study, three kinds of perovskites (MAPbI(3), MAPbI(3-x)Br(x), and MAPbI(3-x)Cl(x)) were used to investigate the crystal stability upon exposure to heat and UV light. SEM, XRD, and FTIR were used to observe the surface morphology, crystal structure, and functional groups of the perovskite thin films. XPS was used to examine the surface composition and chemical state of the perovskite thin films under different conditions. Among these three types of perovskites, it was found that the MAPbI(3-x)Br(x) crystal demonstrated the best stability. ToF-SIMS was used to confirm the molecular distribution of the MAPbI(3-x)Br(x) films upon exposure to heat and UV light at different depths. ToF-SIMS revealed that [Pb](+) and [PbI](+) aggregated at the interface between the perovskite and ITO substrate after 14 days of thermal treatment. On the other hand, [Pb](+) and [PbI](+) were distributed uniformly after 3 days of UV exposure. This study systematically analyzed and revealed the thermal- and UV-induced degradation process of three perovskite films by using surface analysis techniques. It was concluded that bromine-doped perovskite films had better stability, and UV light caused more severe damage than heat.