Abstract
The ability to place individual cells into an engineered microenvironment in a cell-culture model is critical for the study of in vivo relevant cell-cell and cell-extracellular matrix interactions. Microfluidics provides a high-throughput modality to inject various cell types into a microenvironment. Laser guided systems provide the high spatial and temporal resolution necessary for single-cell micropatterning. Combining these two techniques, the authors designed, constructed, tested and evaluated (1) a novel removable microfluidics-based cell-delivery biochip and (2) a combined system that uses the novel biochip coupled with a laser guided cell-micropatterning system to place individual cells into both two-dimensional (2D) and three-dimensional (3D) arrays. Cell-suspensions of chick forebrain neurons and glial cells were loaded into their respective inlet reservoirs and traversed the microfluidic channels until reaching the outlet ports. Individual cells were trapped and guided from the outlet of a microfluidic channel to a target site on the cell-culture substrate. At the target site, 2D and 3D pattern arrays were constructed with micron-level accuracy. Single-cell manipulation was accomplished at a rate of 150 μm s(-1) in the radial plane and 50 μm s(-1) in the axial direction of the laser beam. Results demonstrated that a single-cell can typically be patterned in 20-30 s, and that highly accurate and reproducible cellular arrays and systems can be achieved through coupling the microfluidics-based cell-delivery biochip with the laser guided system.