Abstract
Laser bending is a kind of cumulative forming technology and bending efficiency is one of its most important indexes. This study investigates the bending behavior and the microstructure of DP980 steel plates under different laser scanning strategies, using an IPG laser system. Two sets of experiments varied the accumulated line energy density (AED) by altering the laser scanning velocity and number of scans. The results show that, for the single laser scanning process, the bending angle of the plate increases with AED, due to a larger temperature gradient through the thickness direction; however, this relationship is nonlinear. A higher AED led to a sharper initial increase in bending angle, which then plateaued. Under the same AED conditions, the bending angle of the plate undergoing multiple laser scans increases by at least 26% compared to the single one, due to the microstructure changes. It is revealed that the bending efficiency is affected by both the AED and the resultant microstructure evolution in the DP980 steel. Higher AED values and appropriate peak temperatures facilitate better bending behavior due to the formation of uniform martensite and grain refinement. Conversely, excessive peak temperatures can hinder bending due to grain growth.