Abstract
This investigation aims to study the effect of laser cladding parameters on the microstructure of Stellite 6 on the X19CrMoNbVN11-1 stainless-steel substrate. First, Stellite 6 powder was coated on the X19CrMoNbVN11-1 substrate using the laser cladding method. The effect of laser cladding parameters (i.e., laser power, scanning speed, and powder feed rate) was studied on the microstructure of deposits. The secondary dendritic arm spacing was assessed, and the structural defects were studied (e.g., lack of bonding, porosity, and crack). The results revealed that the microstructure has changed from coating/substrate interface to coating surface, from plate-cellular to columnar and equiaxed dendrites. Also, an increase in the laser power increased the cellular structure in the coating/substrate interface and equiaxed dendrites in the coating surface. The cooling rate (G × R) increased by increasing the scanning and powder injection rates. The microstructure of the Stellite 6 was composed of cobalt solid-solution γ(FCC).