Abstract
PURPOSE: In endovascular neurosurgery, the operator often acquires three-dimensional (3D) images of the cerebral vessels. Although workstation reoperation is required in some situations during treatment, it leads to time loss because a sterile condition cannot be maintained and treatment must be temporarily interrupted. Therefore, a workstation reoperating system is required while maintaining the desired sterility. METHODS: A contactless operating interface using Kinect to control 3D images was developed via gesture recognition for endovascular neurosurgery and was applied to a 3D volume rendering technique (VRT) image reconstructed at the workstation. The left-hand movement determines the assigned functions, whereas the right-hand movement is used like a computer mouse to pan and zoom in/out. In addition to the interface, voice commands were used and assigned to digital operations, such as image view changes and mode signal changes. RESULTS: This system was used for the actual endovascular treatment of cerebral aneurysms and cerebral arteriovenous malformations. The operator and gesture were recognized without any problems. Using voice operation, it was possible to expeditiously set the VRT image back to the reference angle. Furthermore, it was possible to finely adjust gesture operations, including mouse operation, and treatment was completed while maintaining sterile conditions. CONCLUSION: A contactless operating interface was developed by combining the existing workstation system with Kinect and voice recognition software, allowing surgeons to perform a series of operations, which are normally performed in a console room, while maintaining sterile conditions.