Abstract
This paper concerns research into the use of 3D-printed gyroid structures as a modern thermal insulation material in construction. The study focuses on the analysis of open-cell gyroid structures and their effectiveness in insulating external building envelopes. Gyroid composite samples produced using DLP 3D-printing technology were tested to determine key parameters such as thermal conductivity (λ), thermal resistance (R) and heat transfer coefficient (U) according to ISO 9869-1:2014. In addition, the authors carried out a comprehensive analysis of the annual energy balance of four different residential buildings, including older and modern structures, using Arcadia software v9.0. The results showed that 100 mm-thick multi-layer gyroid structures achieve exceptionally low thermal conductivity (approximately 0.023 W/(m·K)), significantly outperforming traditional materials such as mineral wool or polystyrene foam in terms of insulation efficiency. These structures also have high mechanical strength and low density, making them both lightweight and highly durable. As a result of these properties, the structures studied represent a promising solution for designing energy-efficient buildings, effectively reducing heating energy demand and improv the overall energy balance of buildings.