Abstract
Due to the high performance of hydrophobic surfaces in pressure drop reduction, they have been proposed for various applications. However, despite the extensive uses of two-phase flows in many industries, the effect of hydrophobic surfaces on the pressure drop reduction of two-phase flows has not been well understood yet. Thus, in the present study, by implementing the phase-field and finite element methods, the bubbly flows as an example of two-phase flows are considered for examining the effect of hydrophobic microgrooved microchannels on the pressure drop reduction of these regimes in the laminar state. We found out that hydrophobic microgrooved surfaces not only can be efficient in the bubbly flow but also can even cause a maximum pressure drop reduction of up to 70%, which is almost 3.5 times higher than in single-phase flow. We also studied the influence of each parameter, such as bubbles volume or length, Reynolds number, capillary number, and their combination on this phenomenon. The pressure drop reduction grows by increasing the volume of the bubbles but decreases by increasing the flow velocity or the surface tension coefficient. The combination of these parameters demonstrated different results in some circumstances.