Abstract
Steel fiber reinforced concrete (SFRC) offers improved toughness, crack resistance, and impact resistance. Nano-silica enhances the strength, durability, and workability of concrete. This study investigated the combined effect of nano-silica and steel microfibers, termed micro-concrete reinforced with steel fibers embedding nano-silica (MRFAIN), on the mechanical properties of concrete. The aim was to determine the influence of different percentages of nano-silica and steel microfibers on fresh state properties, mechanical strength, and mechanical performance of MRFAIN. MRFAIN mixtures were prepared with cement, sand, water, superplasticizer, varying dosages of nano-silica (0-2%), and steel microfibers (0-2% by volume). Mechanical properties evaluated at 28 days included compressive strength, flexural strength, modulus of elasticity, and fracture energy. Incorporating steel microfibers reduced workability but enhanced mechanical properties like strength and ductility. Nano-silica addition showed variable effects on compressive strength but increased tensile strength. Optimal nano-silica content was 1% and steel microfibers 2%, giving compressive strength 122.5 MPa, tensile strength 25.4 MPa, modulus of elasticity 42.7 GPa. Using nano-silica and steel, microfibers enhanced the mechanical performance of steel fiber-reinforced concrete. This shows potential for reducing construction waste and pollution. Further research can optimize the proportions of nano-silica and steel microfibers in MRFAIN.