Abstract
Recently, ultrafast laser direct writing has become an effective method for preparing flexible films with micro-nano structures. However, effective control of laser parameters to obtain acceptable micro-nano structures and the effect of micro-nano structure sizes on function of the film remain challenges. Additionally, flexible films with high X-band transmittance are urgently required in aerospace and other fields. In this work, we evaluate the feasibility of applying picosecond laser direct writing for fabricating micro-nano structures on the surface of flexible thin film and the relationship between the size of square columnar micro-nano structures and the transmittance of the flexible thin film. The results show that an array of square columnar micro-nano structures was achieved by picosecond laser direct writing on the surface of flexible thin film (Au-SiO(2)-PI) with a thickness of 50 µm. Additionally, excellent micro-nano structures morphology of the square columnar arrays without burning through or destroying were obtained by laser direct writing with a pulse power and frequency of 2 W and 100 KHz, respectively. The results also show that the X-band transmittance was effected by the characteristic of the square columnar array on the surface of the flexible thin film. The X-band transmittance was significantly increased by decreasing the length of the square column on the surface of the flexible thin film. The X-band transmittance was slightly increased by decreasing the width of the groove of the square column on the surface of the flexible thin film.