Abstract
The effect of dispersing multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) in the matrix on the low-velocity impact resistance and post-impact residual tensile strength of the carbon fiber reinforced epoxy composite laminates has been experimentally analyzed in this study. The composite specimens with the matrix reinforced by different nanoparticle types and various nanoparticle concentrations (0.1, 0.3, and 0.5 wt.%) were prepared and impacted. The post-impact tensile quasi-static and fatigue tests were performed on the specimens with different configurations to study the influence of aforementioned factors on the impact resistance and damage tolerance. Experimental results show that adding nanoparticles in the matrix increases the maximum impact force, reduces the damage area, and alleviates the dent depth of the laminates remarkedly. Moreover, the improvement in these impact resistances increases with the applied nanoparticle concentrations. The nano-modified composite laminates present higher post-impact static strength and longer fatigue life than the specimens with a neat epoxy matrix. Furthermore, both the post-impact static tensile strength and fatigue life increase with the applied nanoparticle concentrations. The damage areas measured using infrared thermography were found to increase linearly with the applied fatigue cycles for all the studied specimens with various configurations. The damage area growth rates of nano-modified composite laminates decrease significantly as the applied nanoparticle concentrations increase. The MWCNTs present better performance than GNPs in improving post-impact static strength and extending the residual fatigue life, however the effect of applied nanoparticle type on the fatigue damage growth rate is slight.