Abstract
Pre-stressed high-strength concrete piles (PHCP) are widely used in the building industry in China. The main aim of our research was to investigate the utilization of quartz powder, fly ash, and blast furnace slag as mineral additives to prepare PHCP mortar. The samples were prepared using steam and autoclaving steaming. The influence of minerals on the sulfate resistance of mortar was analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM) and mercury intrusion porosimetry (MIP) tests. The results showed that when compared to single doped quartz powder samples, samples prepared using fly ash or blast furnace slag improved the sulfate resistance of the PHCP mortar. Furthermore, the resistance to sulfate attack of samples with dual doped quartz powder, fly ash, and blast furnace slag also improved. MIP tests showed that mineral additives can change the pore size distribution after autoclave curing. However, the number of aching holes increased after mixing with 20% quartz powder and caused a decrease in the sulfate resistance.