Abstract
The microstructure and properties of a new type of carbon black produced by a domestic company through a new process were systematically characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Raman spectroscopy, and X-ray diffraction (XRD). The vulcanization properties, mechanical properties, and electrical conductivity of the new carbon black with different filler amounts were investigated in styrene butadiene rubber (SBR), using the traditional reinforcing filler N660 carbon black as a control. The experimental results demonstrate that the new carbon black exhibits a stratified structure with a specific surface area of 345.96 m(2)/g, and its particle size distribution is primarily concentrated within the 0.1-1 μm range. When the filling ratio was 30 phr/100 phr, the tensile strength of SBR composites filled with the new carbon black increased by 12.3% and the tear strength increased by 9.6% compared with those filled with N660 carbon black. In summary, the new carbon black can significantly improve the comprehensive performance of SBR composites and reduce the production cost. This provides a new type of material for the rubber industry that takes into account both economy and performance while also providing reference data for basic research in the field of SBR.