Abstract
In this study, N-doped layered porous carbon prepared by the high-temperature solid-state method is used as electrode material. Nano calcium carbonate (CaCO(3)) (40 nm diameter) is used as the hard template, sucrose (C(12)H(22)O(11)) as the carbon source, and melamine (C(3)H(6)N(6)) as the nitrogen source. The materials prepared at 850 °C, 750 °C, and 650 °C are compared with YP-50F commercial super-activated carbon from Japan Kuraray Company. The electrode material at 850 °C pyrolysis temperature has a higher specific surface area and more pores suitable for ion adsorption. Due to these advantages, the salt adsorption capacity (SAC) of the N-doped layered porous carbon at 850 °C reached 12.56 mg/g at 1.2 V applied DC voltage, 500 mg/L initial solution concentration, and 15 mL/min inlet solution flow rate, which is better than the commercial super activated carbon as a comparison. In addition, it will be demonstrated that the N-doped layered porous carbon at 850 °C has a high salt adsorption capacity CDI performance than YP-50F by studying parameters with different applied voltages and flow rates as well as solution concentrations.