Abstract
Tensile deformation behavior of continuous high-strength and high-modulus single carbon fibers impregnated with a polysulfone solution was investigated. The effect of the carbon fiber type, mass fraction of the polymer, and the loading rate on the tensile strength was studied. It was observed that, whereas for high-modulus carbon fibers the magnitude of tensile strength depends significantly on the loading rate, for high-strength carbon fibers, such dependence was nearly not observed. SEM study shows that at low loading rates, elementary filaments inside the impregnated fiber are able to align themselves along the load application axis because a thermoplastic matrix can flow under the tensile stresses' force. As a result, the fiber's strength properties can be realized more effectively in the thermoplastic-based composites than in the same composite with an epoxy matrix.