Abstract
A single-use screen-printed carbon electrode strip was designed and fabricated. Nanohybrids, prepared by deposition of platinum (Pt) nanoparticles on multi-wall carbon nanotube (MWCNT), was modified on the surface of screen-printed carbon electrode for the development of a fast, sensitive and cost-effective hydrogen peroxide (H(2)O(2)) detection amperometric sensor strip. With Pt-MWCNT nanohybrids surface modification, current generated in response to H(2)O(2) by the screen-printed carbon electrode strip was enhanced 100 fold with an applied potential of 300 mV. Quality of as-prepared electrode strip was assured by the low coefficient of variation (CV) (<5%) of currents measured at 5 s. Three linear detection ranges with sensitivity of 75.2, 120.7, and 142.8 μA mM(-1) cm(-2) were observed for H(2)O(2) concentration in the range of 1-15 mM, 0.1-1 mM, and 10-100 μM, respectively. The lowest H(2)O(2) concentration could be measured by the as-prepared strip was 10 μM. H(2)O(2) levels in green tea infusion and pressed Tofu could be rapidly detected with results comparable to that measured by ferrous oxidation xylenol orange (FOX) assay and peroxidase colorimetric method.