Abstract
The hydration heat generated during the concreting of cast-in-place piles causes thermal disturbance to the surrounding permafrost, leading to its thawing. This further affects the stability of the pile foundation and degrades the construction progress. To explore the influence mechanisms of the concrete hydration heat on the permafrost temperature field around the pile, as well as that of different construction seasons on the pile-side boundary conditions and permafrost temperature field, monitoring results of on-site tests and numerical simulation were used to analyze the distribution law of the pile soil temperature field in space and time, and the pile-side boundary conditions and permafrost temperature field during construction seasons. The results show that the temperature trend of the pile foundation can be divided into three stages: a rapid rise phase (0∼2 d), a rapid decline phase (2∼10 d), and a slow decline and stabilization phase (10∼90 d). As the radial distance from the pile center decreases, there occur a corresponding acceleration in temperature increase and an elevated maximum temperature rise (MTR). The influence range of the molding temperature and the hydration heat is about 1∼2 times the pile diameter and less than 1.5 m in the depth direction. Compared to the atmospheric temperature, there is a lag in the change in the permafrost temperature caused by accumulation of ground temperature, and the significant difference between the two leads to an increased rate of heat exchange at the boundary condition. Conducting drilling operation and cast-in-place pile construction in the cold seasons is conducive to reducing the thermal disturbance to the permafrost around the pile in permafrost areas.