Abstract
The adsorption efficiency of Cr(VI) and anionic textile dyes onto MgAl-layered double hydroxides (LDHs) and MgAl-LDH coated on bio-silica (b-SiO(2)) nanoparticles (MgAl-LDH@SiO(2)) derived from waste rice husks was studied in this work. The material was characterized using field-emission scanning electron microscopy (FE-SEM/EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopic (XPS) techniques. The adsorption capacities of MgAl-LDH@SiO(2) were increased by 12.2%, 11.7%, 10.6%, and 10.0% in the processes of Cr(VI), Acid Blue 225 (AB-225), Acid Violet 109 (AV-109), and Acid Green 40 (AG-40) dye removal versus MgAl-LDH. The obtained results indicated the contribution of b-SiO(2) to the development of active surface functionalities of MgAl-LDH. A kinetic study indicated lower intraparticle diffusional transport resistance. Physisorption is the dominant mechanism for dye removal, while surface complexation dominates in the processes of Cr(VI) removal. The disposal of effluent water after five adsorption/desorption cycles was attained using enzymatic decolorization, photocatalytic degradation of the dyes, and chromate reduction, satisfying the prescribed national legislation. Under optimal conditions and using immobilized horseradish peroxidase (HRP), efficient decolorization of effluent solutions containing AB-225 and AV-109 dyes was achieved. Exhausted MgAl-LDH@SiO(2) was processed by dissolution/precipitation of Mg and Al hydroxides, while residual silica was used as a reinforcing filler in polyester composites. The fire-proofing properties of composites with Mg and Al hydroxides were also improved, which provides a closed loop with zero waste generation. The development of wastewater treatment technologies and the production of potentially marketable composites led to the successful achievement of both low environmental impacts and circular economy implementation.