Abstract
Electroplating can induce nickel release even from 316L stainless steel, typically considered safe. In this work, the influence of different electroplating processes and surface treatments on nickel release was evaluated. The nickel release was tested according to the EN 1811 standard. The impact of surface roughness on nickel release was assessed by comparing polished and unpolished samples. Results indicate that internal stresses can worsen nickel release, while increasing the thickness of the precious metal layer is beneficial. To corroborate our hypothesis, it was verified that coatings obtained through physical vapor deposition (PVD), without removing the passivation layer of the steel, did not release nickel. For these reasons, we identified the main cause of nickel release as the combined effect of the removal of the passivation layer of stainless steel and the microporosity of the electroplating process.