Abstract
Young's modulus (E) is one of the most important parameters in the mechanical properties of solid materials. Young's modulus is proportional to the stress and strain values. There are several experimental and theoretical methods for gaining Young's modulus values, such as stress-strain curves in compression and tensile tests, electromagnetic-acoustic resonance, ultrasonic pulse echo and density functional theory (DFT) in different basis sets. Apparently, preparing specimens for measuring Young's modulus through the experimental methods is not convenient and it is time-consuming. In addition, for calculating Young's modulus values by software, presumptions of data and structures are needed. Therefore, this new method for gaining the Young's modulus values of crystalline materials is presented. Herein, the new method for calculating Young's modulus of crystalline materials is extracted by X-ray diffraction. In this study, Young's modulus values were gained through the arbitrary planes such as random (hkl) in the research. In this study, calculation of Young's modulus through the relationship between elastic compliances, geometry of the crystal lattice and the planar density of each plane is obtained by X-ray diffraction. Sodium chloride (NaCl) with crystal lattices of FCC was selected as the example. The X-ray diffraction, elastic stiffness constant and elastic compliances values have been chosen by the X'Pert software, literature and experimental measurements, respectively. The elastic stiffness constant and Young's modulus of NaCl were measured by the ultrasonic technique and, finally, the results were in good agreement with the new method of this study. The aim of the modified Williamson-Hall (W-H) method in the uniform stress deformation model (USDM) utilized in this paper is to provide a new approach of using the W-H equation, so that a least squares technique can be applied to minimize the sources of errors.