Abstract
A laboratory setup with two axis of manual sun-tracking was designed and built. To get the predicted values for a solar injera stove, a 20-min heating time to prepare it for baking, 3.1 kWh power in the first hour, and 5.8 kWh (with only an 87 percent increase) in the second hour were acquired to bake 9 and 28 injera using electric injera stove, respectively. The temperature distribution on the clay surface was the range of 180 °C-220 °C. Solar injera baking stove was designed and built using the average energy required to bake one injera from an electrical injera stove. The laboratory setup was put to the test, temperatures at the receiver's surface ranging from 315 to 318 °C and an average solar radiation of 1000 W/m(2) was obtained on the first test. The injera stove inlet reached a maximum temperature of 180.92 °C with a pressure of 14.5 bars during a pressurized hot water production and circulation test (load test). The surface temperature of the solar injera stove clay plate reached a maximum of 62.69 °C. Temperature of more than 60 °C was maintained on the surface of the solar injera stove plate for nearly 2 h.