Abstract
In this report, micro-patterned silicon semiconductor photovoltaic cells have been proposed to improve the efficiency in various incident sunlight angles, using homeotropic liquid crystal polymers. The anisotropic liquid crystal precursor solution based on a reactive mesogen has good flowing characteristics. It can be evenly coated on the silicon solar cells' surface by a conventional spreading technique, such as spin coating. Once cured, the polymers exhibit asymmetric transmittance properties. The optical retardation characteristics of the coated polymer films can be eventually determined by the applicable coating and curing parameters during the processes. The birefringence of light then influences the optical path and the divergence of any encountered sunlight. This allows more photons to enter the active semiconductor layers for optical absorption, resulting in an increase in the photon-to-electron conversion, and thus improving the photovoltaic cell efficiency. This new design is straightforward and could allow various patterns to be created for scientific development. The experimental results have evidenced that the energy conversion efficiency could be improved by 2-3% for the silicon photovoltaic cells, under direct sunlight or at no inclination, when the liquid crystal polymer precursor solution is prepared at 5%. In addition, the efficiency could be much more significantly improved to 14-16% when the angle is inclined to 45°. The unique patterned liquid crystal polymer thin films provide enhanced energy conversion efficiency for silicon photovoltaic cells. The design could be further evaluated for other solar cell applications.