The Use of Chitin for the Removal of Nitrates and Orthophosphates from Greenhouse Wastewater

利用几丁质去除温室废水中的硝酸盐和正磷酸盐

阅读:2

Abstract

The study investigated the possibility of using chitin flakes as an unconventional sorbent for the removal of orthophosphates and nitrates from greenhouse wastewater (GW). The effluent parameters were as follows: 66.2 mg P-PO(4)/L, 566.0 mg N-NO(3)/L, 456.0 mg S-SO(4)/L, 13.7 mg Cl(-)/L, 721 mg Ca(2+)/L, 230 mg Mg(2+)/L, hardness 11.3 °dH, and pH 5.4. The scope of the research included determinations of the influence of pH on GW composition and the efficiency of nutrient sorption, the kinetics of nutrient sorption, the influence of the dose of chitin flakes on the effectiveness of nutrient binding and the maximum sorption capacity of the sorbent. The sorption of P-PO(4) on the tested sorbent was most effective at pH 4, and the sorption of N-NO(3) at pH 2. The equilibrium time of sorption of both nutrients from GW to chitin depended on the sorbent dose and ranged from 150 to 180 min. The sorbent dose of 40 g/L enabled removing 90% of orthophosphates and 5.7% of nitrates from the wastewater. The maximum sorption capacity of CH towards P-PO(4) and N-NO(3) contained in the GW was 3.20 mg/g and 3.04 mg/g, respectively. In turn, the sorption of calcium and magnesium ions on chitin flakes was completely ineffective.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。