Abstract
The study was aimed at identifying the potential energy saving for groundwater pumping through enhanced efficiency of the pump sets. A total of 65 electrically powered tube wells were selected in the Sonipat district of the north Indian State of Haryana to study the energy use efficiency for groundwater pumping. The existing efficiency as well as the minimum expected overall efficiency of the tubewells were determined based on field survey, measurements, and applicable standard code of the Bureau of India Standards. The overall efficiencies of selected tube wells, computed based on actual measured power consumption, varied from 10.1% to 56.6% in the Sonipat block and 15.3% to 52.8% in the Rai block. The average energy requirement, for the selected tube wells, at the current efficiency level was 4,364.0 and 13,100.4 kWh for wheat and paddy crops, respectively, in the Sonipat block, while it was 3,424.8 and 10,280.9 kWh for wheat and paddy crops, respectively, in the Rai block. Analysis revealed that improving overall efficiency from the current level to the minimum expected level can lead to energy savings of 48.3% and 35.9% for tube wells in the Sonipat and Rai block, respectively. In the Rai block, where the groundwater level has declined significantly, the replacement of inefficient pumps should be done in tandem with crop diversification, improving water application efficiency and groundwater status by employing improved irrigation management practices and adopting groundwater recharge techniques.