The Influence of Graft Tensioning Sequence on Tibiofemoral Orientation during Bicruciate and Posterolateral Corner Knee Ligament Reconstruction: A Biomechanical Study

双交叉韧带和后外侧角膝关节重建术中移植物张力顺序对胫股关节方向的影响:一项生物力学研究

阅读:1

Abstract

OBJECTIVES: During a multiple knee ligament reconstruction, the graft tensioning order may influence the final tibiofemoral orientation and corresponding knee kinematics. Therefore, the objective of this study was to biomechanically evaluate the effect of different graft tensioning sequences on knee tibiofemoral orientation following multiple knee ligament reconstruction in a bicruciate ligament (anterior cruciate ligament [ACL] and posterior cruciate ligament [PCL]) with posterolateral corner [PLC] injured knee. METHODS: Ten non-paired, fresh-frozen human cadaveric knees were utilized for this study. Following reconstruction of both cruciate and posterolateral corner ligaments and proximal graft fixation, each knee was randomly assigned to each of four graft tensioning order groups: (1) PCL → ACL → PLC, (2) PCL → PLC → ACL, (3) PLC → ACL → PCL and (4) ACL → PCL → PLC. The tibiofemoral orientation after graft tensioning was measured and compared to the intact states. RESULTS: Tensioning the ACL first (tensioning order 4) resulted in posterior displacement of the tibia at 0° by 1.7 ± 1.3 mm compared to the intact state (p=0.002) (Figure 1). All tensioning orders resulted in significantly increased anterior tibial translation compared to the intact state at higher flexion angles ranging from 2.7 mm to 3.2 mm at 60° and 3.1 mm to 3.4 mm at 90° for tensioning orders 1 and 2 respectively (all p<0.001). There was no significant difference in tibiofemoral orientation in the sagittal plane between the tensioning orders at higher flexion angles. All tensioning orders resulted in increased internal tibial rotation (all p<0.001). Tensioning and fixing the PLC first (tensioning order 3) resulted in the most increases in internal rotation of the tibia; 2.4° ± 1.9°, 2.7° ± 1.8° and 2.0° ± 2.0° at 0°, 30° and 60° respectively (Table 1). CONCLUSION: None of the tensioning orders restored intact knee tibiofemoral orientation. Tensioning the posterolateral corner first should be avoided in bicruciate knee ligament reconstruction with a concurrent posterolateral corner reconstruction because it significantly increased tibial internal rotation. We recommend that the PCL be tensioned first, followed by the ACL to avoid posterior translation of the tibia in extension where the knee is primarily loaded with most activities and finally the PLC.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。