Abstract
The removal of harmful arsenic(V) from aqueous solutions using Cyanex 923 (solvation extractant) was investigated using various experimental variables: equilibration time, the acidity of the aqueous phase, temperature, extractant and arsenic concentrations, and O/A ratio. Cyanex 923 extracted As(V) (and sulfuric acid) from acidic solutions; however, it could not be used to remove the metal from slightly acid or neutral solutions. The extraction of arsenic is exothermic and responded to the formation of H(3)AsO(4)·nL species in the organic phase (L represents the extractant, and the stoichiometric factor, n = 1 or 2, depends on the acidity of the aqueous phase). Extraction isotherms are derived from the experimental results. Both arsenic and sulfuric acid loaded onto the organic phase can be stripped with water, and stripping isotherms are also derived from the experimental results. The selectivity of the system against the presence of other metals (Cu(II), Ni(II), Bi(III), and Sb(III)) is investigated, and the ability of Cyanex 923 to extract As(V) and sulfuric acid compared to the use of other P=O-based solvation reagents, such dibutyl butylphosphonate (DBBP) and tri-butyl phosphate (TBP), is also investigated.