Abstract
To achieve high-efficiency combustion of heavy fuel oil (HFO), this study investigated the combustion characteristics of methanol/HFO droplets with methanol content from 10 to 30% using the suspension method under ambient temperature from 923 to 1023 K. The combustion of methanol/HFO droplets was summarized as a two-phase process consisting of six typical stages, emphasizing liquid phase. Especially, the fluctuation evaporation stage, induced by frequent and intense puffing, was identified as prominent character. Both the ignition delay and lifetime of HFO and methanol/HFO droplets decreased with increasing ambient temperatures. For the methanol/HFO droplet, the ignition delay and droplet lifetime increased with the increasing methanol content. Prominently, compared to HFO, HM10 had the most significant reduction in droplet lifetime and TINL under the same operating conditions, which indicated that the addition of 10% methanol accelerated the combustion process and reduced soot generation. Additionally, the thermos-dynamic characteristics of methanol/HFO droplets were investigated. Puffing was primarily attributed to superheating of methanol and pyrolysis of heavy components in HFO, which resulted in active and passive rupture of bubbles. Similarity and maximum deformation were employed to qualitatively distinguish between them. The obtained findings aimed to develop a promising alternative fuel to reduce emissions and preserve energy.