Abstract
As a new type of third-generation automotive steel with high strength and plasticity, medium-Mn steel (MMnS) has been widely used in automotive industries for its excellent properties. In recent years, servo stamping technology for high-strength metal forming is a hot topic due to its good performance in forming under complex processing conditions, and servo parameters determine the forming quality. In this paper, experiments considering tensile speed and position where speed changes (PSC) were carried out on MMnS to investigate the influences of tensile parameters on mechanical properties including strength and total elongation (TE). The results show that PSC does not significantly impact total elongation. Initial tensile speed (ITS) and final tensile speed (FTS) significantly impact the total elongation. The interaction between all tensile parameters can impact total elongation. Two artificial neural networks, back propagation neural network (BPNN) and radial basis function neural network (RBFNN), were used to establish analytical models. The results of supplemental experiment and residual analysis were conducted to verify the accuracy of the analytical models. The BPNN has a better performance and the analytical model shows that with the increase of PSC, it has a slight impact on the changes of optimal and minimum total elongation, but the combinations of tensile parameters to obtain total elongations higher than 40% change significantly.