Abstract
Incorporating nanoparticles into denture materials shows promise for the prevention of denture-associated fungal infections. This study investigates the antifungal properties of acrylic modified with microwave-sintered ZnO-Ag nanoparticles. ZnO-Ag nanoparticles (1% and 2.5% wt.) were synthesized via microwave solvothermal synthesis (MSS). Nanoparticles were characterized for phase purity, specific surface area (SSA), density, morphology, and elemental composition. ZnO and ZnO-Ag nanoparticles were added to acrylic material (PMMA) at concentrations of 1% and 2.5% and polymerized. Pure PMMA (control) and obtained PMMA-nanocomposites were cut into homogeneous 10 × 10 mm samples. Antifungal activity of nanoparticles and PMMA-nanocomposites against C. albicans was tested using minimal inhibitory concentration (MIC) determination, and biofilm formation was assessed using crystal violet staining followed by absorbance measurements. Laboratory tests confirmed phase purity and uniform, spherical particle distribution. MIC results show antifungal activity of 1% Ag nanoparticles and the PMMA-2.5% (ZnO-1% Ag) nanocomposite. PMMA-1% (ZnO-1% Ag) nanocomposite and 1% ZnO-Ag nanoparticles are efficient in preventing biofilm formation. However, ZnO nanoparticles showed antibiofilm activity, and the PMMA-ZnO nanocomposite does not protect against biofilm deposition. Incorporating hybrid ZnO-Ag nanoparticles into PMMA is a promising antibiofilm method, especially with ZnO-1% Ag nanoparticles.