Abstract
Heritage sites built with natural stone are at risk from fires, which can alter stone properties and compromise its structural integrity. Over 60 studies in the past three decades have examined fire impact on natural stone, providing insights for their prevention and restoration. The primary objectives are to develop effective strategies to mitigate fire risks, protect heritage structures, and ensure the preservation of our cultural legacy. Two noteworthy Portuguese limestones used as heritage building materials: Lioz (LL) and grey Ançã stone (GAS), were studied regarding the effect of high-temperature exposure for simulating fire at 200 °C, 400 °C and 600 °C, followed by cooling in water to reproduce fire extinguish in natural stone buildings. The findings provided insights into how the different temperatures impact the stone morphological, physical and mechanical properties. Color measurements (CIE L*a*b*) showed a color difference from 3 to 32 %; SEM-EDS confirmed microstructure modifications after fire exposure with cracks formation and intragranular porosity development. Among the diverse physical and mechanical properties of the stones, uniaxial compressive strength decreased from 1 to 33 %, Leeb D hardness decreased up to 12.2 %, lowering in open porosity was detected in the range 70-289 % and ultrasound speed propagation were significantly affected after thermal cycle at 600 °C with a negative variation reaching 49 %. Results from TGA show a loss of mass due to retained water (∼40 °C) and loss of hydration water at ∼ 120 °C in both limestones. The total mass loss (∼42-∼44 %) is associated with the loss of H2O, CO2. In conclusion, stones with higher toughness and compression strength exhibited reduced damage at high temperatures due to their enhanced resistance to fracturing under stress. As limestone's mechanical strength decreases under high temperatures, it's advisable to increase its thickness to ensure sufficient support for loads and intended conditions of use. The deficiency of analysis on limestone's mechanical decay from fire reveals a significant knowledge gap regarding the complete extent of damage and deterioration in stone heritage structures.