Abstract
This work investigated the facile synthesis of porous scaffold eggshell derived hydroxylapatite (ESHAp) as a composite with ammonium bicarbonate (AMB) for potential biomaterial in tissue engineering application. The phase purity, composition, size, functional groups and morphology of the apatite were elucidated using high resolution transmission electron microscopy (HTEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The results showed that hydroxylapatite (HAp) nanoparticles have round morphologies with average diameters between 20 nm and 80 nm, FT-IR analysis confirmed significant hydroxylapatite functional groups like carbonate, phosphate, and hydroxyl groups, while XRD analysis revealed a well crystalline monophasic HAp powder. The scaffold samples containing 10, 20, 25 and 30 % of AMB withstood a compressive stress up to 5, 20, 30 and 42 N/mm2 respectively which indicates that the compressive stress increased with the AMB content introduced as the pore forming agent. MTT assay performed using MG63 osteosarcoma cell lines showed that on comparing the sample of ESTHAp which contained 0 % AMB with other samples in the range of 0.01-1 mM, viability of above 85 % MG63 cells was achieved except for ESTHAp with 40 % AMB, which showed some level of toxicity. The cell adhesion studies of sintered ESTHAp porous scaffold with different weight percent of the pore forming agents using inverted microscopic images of MG 63 cells incubated with ESTHAp samples and treated with heat at 1000 °C appeared to be unstable in the media used with particle leaching observed, and no cells observed near to the samples.