Abstract
The paper presents an analysis of the possibilities of using glass waste from recycled lighting materials as aggregates for cement concrete. The research material was obtained from a company that utilizes electrical waste. Glass from pre-sorted elements was transported to the laboratory and crushed in a drum crusher. In this way, the aggregate obtained was subjected to the basic tests that are carried out for aggregates traditionally used in construction. The specific density of aggregate, bulk density, absorbability, crushing index, grain shape, texture type and aggregate flatness index were examined. In the next stage of research work, concrete mixtures were made in which crushed aggregate from crushed fluorescent lamps was used as a substitute for gravel aggregate. Mixtures containing 10%, 30%, 50% and 100% aggregate were made. A mixture containing only sand and gravel aggregate was made as a comparative mixture. Basic tests of both fresh concrete mix and hardened concrete were carried out for all concrete made. The consistency of the fresh concrete mix, the air content in the concrete mix, the density of hardened concrete, absorbability, water permeability under pressure and the basic compressive and tensile (flexular) strength tests were performed. The test results showed that the greater the addition of recycled glass aggregate, the less advantageous are the features of the concrete obtained with its participation. Microscopic analyses carried out in order to explain this phenomenon indicated an unfavorable influence of the grain shape of the aggregate thus obtained. Despite this fact, recycling of lighting waste in concrete composites is recommended as a pro-ecology measure; however, attention was paid to the benefits of using only 30% by mass of said waste in relation to the weight of the traditional aggregate used. Composite with such a quantity of waste retained the characteristics of cement concrete, which qualified its use for construction concrete.