Abstract
In this article, a Single Inductor Multiple Output (SIMO) DC-DC boost converter for driving independent three outputs of dynamic voltage and low power is proposed. Compared with the traditional SIMO DC-DC converter, the proposed work accomplishes (i) independent control of power at each output, (ii) small switch count, (iii) relatively better scalability with increasing output channel, (iv) fast response time, and (v) relatively better efficiency. The core aim of the current article is to implement an efficient controller design of the SIMO DC converter circuit operating in continuous conduction mode for dynamic voltage applications. The SIMO circuit comprises a photovoltaic (PV) array as a renewable energy harvesting source at the input. A hysteretic controller based on direct control with seamless transition control topology is implemented in this model for SIMO operation. This scheme is popular due to its less cost, simple, easy-to-use design architecture, and fast speed of close loop control. The configuration of the solar array is designed to deliver maximum power on the input of the SIMO DC-DC converter. For tracking the maximum power point, incremental conductance with integral control configuration is applied on the PV array with fast speed and efficiency. The MATLAB/Simulink environment is utilized for model configuration. The simulation results show that the proposed SIMO configuration with the PV array provided 100.5 W and 21.7 W for 1000 W/m(2) and 250 W/m(2), respectively.