Abstract
The piped hydraulic transportation of tube-contained raw material is a new low-carbon and environmental protection technique for transporting materials. The velocity characteristics of the spiral flow in the pipe with different numbers of guide bars installed on the surface of the piped vehicle body during piped hydraulic transportation of tube-contained raw material were studied by the theoretical analysis and model test. In the test, the numbers of guide bars placed on the surface of the piped vehicle body was respectively 3, 4, 5, and 6, and the studied sections were the section of the piped vehicle body and its rear section, and the flow discharge was 40 m(3)/h. The results showed that as the number of guide bars increased, the axial velocity of the section of the piped vehicle body increased gradually, while the axial velocity of the rear section of the piped vehicle reduced first and then increased. The section circumferential and radial flow velocity of the piped vehicle body and its rear section both increased first and then reduced. When the number of guide bars installed on the surface of the piped vehicle body was 4, the section circumferential flow velocity of the piped vehicle body and its rear section reached the maximum value, and their distributions were relatively uniform. The results offer theoretical basis so that we can optimize the structure of the piped vehicle and further popularize the piped hydraulic transportation technique of tube-contained raw material.