Abstract
Developing microphysiological cell culture platforms with a three-dimensional (3D) microenvironment has been a significant advancement from traditional monolayer cultures. Still, most of the current microphysiological platforms are limited in closed designs, i.e. are not accessible after 3D cell culture loading. Here, we report an open-top microfluidic chip which enables the generation of two sequentially loaded 3D cell cultures without physical barriers restricting the nurture, gas exchange and cellular communication. As a proof-of-concept, we demonstrated the formation of two 3D vasculatures, one in the upper and the other in the lower compartment, under three distinct flow conditions: asymmetric side-to-center, symmetric side-to-center and symmetric center-to-side. We used computational modelling to characterize initial flow pressures in cell culture compartments. We showed prominent vessel formation and branched vasculatures in upper and lower cell culture compartments with interconnecting, lumenized vessels with in vivo-relevant diameter in all flow conditions. With advanced image processing, we quantified and compared the overall vascular network volume and the total length formed in asymmetric side-to-center, symmetric side-to-center and symmetric center-to-side flow conditions. Our results indicate that the developed chip can house two distinct 3D cell cultures with merging vessels between compartments and by providing asymmetric side-to-center or symmetric center-to-side flow vascular morphogenesis is enhanced in terms of overall network length. The developed open-top microfluidic chip may find various applications in generation of tissue-specific 3D-3D co-cultures for studying cellular interactions in vascularized tissues and organs.