Abstract
The purpose of this work is to study the accelerated aging behavior of a room-temperature vulcanized (RTV) silicone rubber anti-pollution flashover coating. Red, blue and gray RTV rubber samples were selected to prepare coatings on the surface of stainless-steel sheets. The accelerated aging test was carried out in an aging test chamber according to a four-step program cycle. After the completion of different aging tests, the color difference, glossiness, surface micromorphology, wettability, insulation performance and other parameters of the samples were measured using colorimetry, infrared spectrometry, scanning electron microscopy, and a high-voltage breakdown tester. The results showed that with the increase in aging time, the color difference ∆E(ab) of the coatings increased. The G60 gloss value decreased gradually and tended to be saturated after 60 cycles. After the aging tests, the RTV coating surface had holes, cracks, peeling and other damage to varying degrees. The C:Si atomic ratio was less than 2, and the hydrophobicity was obviously deteriorated. After aging, the electrical strength of the three RTV coatings decreased significantly. It can be concluded that during the accelerated aging test, the RTV coating had cross-linking and oxidation reactions, and the internal deterioration and surface damage of the coating led to changes in its color, luster, morphology, insulation strength, etc.