Abstract
In this work, waterborne epoxy resin and graphene/ZnO (Gr/ZnO) were employed as the matrix and nanofiller to construct composite coatings with enhanced anticorrosive performance. The corrosion protection properties of the coatings were significantly improved by the dispersed Gr sheets, as well as the parallelly assembled ZnO nanoparticles. The most remarkable improvement was achieved by adding 0.04 wt% of Gr and 0.4 wt% of ZnO in the Waterborne Epoxy (WEP) coatings, where the highest impedance was 200 530 Ω cm(2) on Gr(0.04)-ZnO(0.4), far more than pure epoxy with 6186 Ω cm(2) after 7 days of immersion in electrolytes. Furthermore, the Gr(0.04)-ZnO(0.4) coatings and corresponding corrosion products immersed in a 3.5% NaCl solution for 30 days were also characterized, which could further reveal anticorrosion mechanisms of the graphene modified WEP coatings and the passivated effect of ZnO. Through the mechanism analysis, we also found that ZnO could be employed as the barrier reinforcement to improve the dispersibility of graphene in WEP coatings, and the parallel assembly of graphene occurs spontaneously, leading to remarkable improvement of anticorrosion properties.