Abstract
Ni-xCr-Mo laser-cladding coatings with varying Cr content of 10, 15, 20, 25, and 30 wt.% were fabricated using a self-assembled coaxial laser-cladding device. The H(2)S-induced high-temperature corrosion tests under reductive atmosphere were conducted at 500, 550, and 600 °C. Subsequently, the influence of Cr content on the microstructural evolution and corrosion resistance of the Ni-xCr-Mo coatings was investigated. The experimental results revealed that 30 wt.% Cr is the limited maximum content that forms the suitable morphology of coatings without large prominent pores and cracks during the fabrication process, and 15 wt.% Cr corresponds to the critical minimum content for excellent corrosion resistance, as implied from the variation tendency of the corrosion weight-gain curves. Moreover, a two-layer structure of the corrosion scales was observed in the Ni-xCr-Mo laser-cladding coatings, which was primarily caused by the selective corrosion between the Ni and S and Cr/Mo and O.