Abstract
European aspen (Populus tremula (L.) (Salicaceae)) bark is a promising raw material in multi-step biorefinery schemes due to its wide availability and higher content of secondary metabolites in comparison to stem wood biomass. The main objective of this study was to investigate the major cell wall component-enriched fractions that were obtained from aspen bark residue after extractives isolation, primarily focusing on integration of separated lignin fractions and cellulose-enriched bark residue into complex valorization pathways. The "lignin first" biorefinery approach was applied using mild organosolv delignification. The varying solvent systems and process conditions for optimal delignification of residual aspen bark biomass were studied using a response surface methodology approach. The conditions for maximum process desirability at which the highest amount of lignin-enriched fraction was separated were as follows: 20-h treatment time at 117 °C, butanol/water 4:1 (v/v) solvent system with solid to liquid ratio of 1 to 10. At optimal separation conditions, lignin-enriched fraction exhibited a higher content of β-O-4 linkages vs. C-C linkages content in its structure as well as a high amount of hydroxyl groups, being attractive for its further valorization. At the same time, the content of glucose in products of cellulose-enriched residue hydrolysis was 52.1%, increased from 10.3% in untreated aspen bark. This indicates that this fraction is a promising raw material for obtaining cellulose and fermentable glucose. These results show that mild organosolv delignification of extracted tree bark can be proposed as a novel biorefinery approach for isolation of renewable value-added products with various application potentials.