Abstract
Composite bipolar plates (BPs) hinder their application in proton exchange membrane fuel cells (PEMFC) because of their poor conductivity and mechanical properties. Nanofillers can effectively solve this problem but often have a limited effect due to their easy agglomeration. In this work, a continuous mesh carboxylated multi-walled carbon nanotube (MWCNT) coating on the surface of graphite was synthesized by chemical vapor deposition (CVD) and carboxylation modification, and the composite BPs were prepared by molding using prepared reticulated carboxylated MWCNTs, expanded graphite, and resin. By optimizing the carboxylation treatment time and the content of the nano-filler, the composite BPs had the best performance at a 15 min carboxylation treatment time and 2.4% filler content. The planar conductivity reached up to 243.52 S/cm, while the flexural strength increased to 61.9 MPa. The thermal conductivity and hydrophobicity were improved compared with the conventional graphite/resin composite BPs, and good corrosion resistance has been demonstrated under the PEMFC operating environment. This work provides a novel nanofiller modification paradigm for PBs.