Abstract
BACKGROUND: The detection and quantification of solid components in pulmonary subsolid nodules (SSN) are of vital importance on differential diagnosis, pathological speculation and prognosis prediction. However, no objective and wide-accepted criterion has been built up to now. The purpose of this study is to explore the optimal threshold that can be used for the detection and quantification of solid components in SSNs by using threshold segmentation method on computed tomography (CT) images. METHODS: CT images of 102 SSNs were retrospectively analyzed. To establish a reference standard, the observers made judgments on whether the solid component existed in every SSN and did manual measurements of the volume of solid component with the help of software. Threshold segmentations of every nodule were then performed using different threshold settings and all of the measured volumes were assumed to be solid volumes, then solid-to-total volume ratios were calculated. The results were compared with the reference standards using the receiver operating characteristic curve and Wilcoxon test. RESULTS: The application of thresholds as -250 HU or -300 HU resulted in high diagnostic value on the detection of solid component, with area under curve values as 0.982 and 0.977, respectively; the cut-off values of solid-to-total volume ratio were 1.10% and 6.14%, respectively; the median volumes of solid components were 202.7 mm3 (598.2 mm3), 247.1 mm3(696.0 mm3), which were not significantly different from the reference standard[199.5 mm3 (743.1 mm3)](P=0.125,1, 0.061,3). CONCLUSIONS: Threshold segmentation on chest CT images is valuable to detect and quantify the solid component on SSNs, the thresholds as -250 HU and -300 HU are recommended.
.