Abstract
In this study, we assess a developed novel dynamic moving phantom system that can reproduce patient three-dimensional (3D) tumor motion and patient anatomy, and perform patient-specific quality assurance (QA) of respiratory-gated radiotherapy using SyncTraX. Three patients with lung cancer were enrolled in a study. 3D printing technology was adopted to obtain individualized lung phantoms using CT images. A water-equivalent phantom (WEP) with the 3D-printed plate lung phantom was set at the tip of the robotic arm. The log file that recorded the 3D positions of the lung tumor was used as the input to the dynamic robotic moving phantom. The WEP was driven to track 3D respiratory motion. Respiratory-gated radiotherapy was performed for driving the WEP. The tracking accuracy was calculated as the differences between the actual and measured positions. For the absolute dose and dose distribution, the differences between the planned and measured doses were calculated. The differences between the planned and measured absolute doses were <1.0% at the isocenter and <4.0% for the lung region. The gamma pass ratios of γ(3 mm/3%) and γ(2 mm/2%) under the conditions of gating and no-gating were 99.9 ± 0.1% and 90.1 ± 8.5%, and 97.5 ± 0.9% and 68.6 ± 17.8%, respectively, for all the patients. Furthermore, for all the patients, the mean ± SD of the root mean square values of the positional error were 0.11 ± 0.04 mm, 0.33 ± 0.04 mm, and 0.20 ± 0.04 mm in the LR, AP, and SI directions, respectively. Finally, we showed that patient-specific QA of respiratory-gated radiotherapy using SyncTraX can be performed under realistic conditions using the moving phantom.