Use of proposed systolic and myocardial performance indices derived from simultaneous ECG and PCG recordings to assess cardiac function in healthy Beagles

Cardiac time intervals (CTIs) can provide important information on the electrical and mechanical properties of the heart. We hypothesized that cardiac function can be described using the combined power of electrocardiography (ECG) and phonocardiography (PCG) signals. This study aimed to (1) validate a novel custom device in measuring CTI parameters; (2) compare CTI parameters with a commercially available device and standard transthoracic echocardiography (STE); and (3) compare calculated systolic performance index (SPI) and myocardial performance index (MPI) with Tei index from the STE. Materials and

We have validated the use of the custom-built device to describe CTIs that are comparable to the commercially available device and STE in healthy Beagles. The proposed SPI and MPI derived from CTI parameters can be useful in clinical practice to describe the cardiac function, especially in areas where access to STE is constrained.

This study determined CTIs based on simultaneous ECG and PCG recordings in 14 healthy Beagle dogs using the custom-built device. These CTI parameters were compared with a commercially available device (Eko DUO ECG + Digital Stethoscope; Eko DUO) and the STE. Agreement of CTI parameters between the custom device and the commercially available device or STE was evaluated. Calculated SPI and MPI based on Wigger's diagram were proposed, compared with SPI and Tei index, and correlated with STE parameters.

We found that the ECG and PCG parameters measured from the custom-built device did not differ from the commercially available device and the STE. By combining ECG and PCG signals, we established CTI parameters in healthy dogs including indices for systolic function (SPI: QS1/S1S2) and global cardiac function {F1 ([QS1+S2]/S1S2), F2 ([RS1+S2]/S1S2), and F3 (RS1 + [QS2-QT]/S1S2)}. The SPI, F2, and F3 were comparable with echocardiographic parameters describing systolic (Pre-ejection period/left ventricular ejection time [LVET]) and Tei index ([MCOdur-LVET]/LVET), respectively. Only SPI and F3 were correlated significantly with MCOdur and heart rate, respectively.