Abstract
The traditional single electromechanical conversion energy harvester can collect energy only in a single vibration direction. Moreover, it requires high environmental vibration frequency, and its output power is low. To solve these problems, a cross-shaped magnetically coupled piezoelectric-electromagnetic hybrid harvester is proposed. The harvester comprised a ring-shaped support frame, a piezoelectric generation structure, and an electromagnetic generation structure. The harvester could simultaneously generate energy piezoelectrically and electrically, in addition, it could generate electricity efficiently at a lower environmental vibration, and it can collect the energy in two vibration directions simultaneously. To verify the effectiveness of the device, we set up a vibration experiment system and conducted comparative experiments about non-magnetically coupled piezoelectric, magnetically coupled piezoelectric, and magnetically coupled piezoelectric-electromagnetic hybrid energy harvesters. The experimental results showed that the output power of the magnetically coupled piezoelectric-electromagnetic hybrid energy harvester was 2.13 mW for the piezoelectric structure and 1.76 mW for the electromagnetic structure under the vibration of single-direction resonant frequency. The total hybrid output power was 3.89 mW. The hybrid harvester could collect vibration energy parallel to the ring in any direction. Furthermore, compared with the non-magnetically coupled piezoelectric energy harvester and the magnetically coupled piezoelectric energy harvester, the output power was increased by 141.6% and 55.6%, respectively.