Abstract
In order to ensure the effective vibration-reduction and vibration-isolation of the steel spring floating plate rail and meet the safe operation requirements of the subway, a Fiber Bragg Grating (FBG) displacement sensor for the deformation monitoring of the subway floating plate is proposed. The sensor adopts double FBGs to realize temperature self-compensation. The elastic ring is used as the elastic conversion structure after the fiber grating is pre-stretched; the two ends are pasted and fixed in the groove in the diameter direction of the ring, which avoids the waveform distortion caused by the full pasting of the fiber grating. The combination of linear bearing and displacement probe rods can increase stability and reduce friction loss so that the sensor has the advantages of high sensitivity and accurate measurement results. The test results and error analysis show that in the range of 0~20 mm, the sensitivity of the sensor is 164.2 pm/mm, the accuracy reaches 0.09% F.S, and the repeatability error and hysteresis error are only 1.86% and 0.99%, respectively. The thermal displacement coupling experiment proves that the sensor has good temperature self-compensation performance. It provides a new technical scheme for the effective monitoring and condition assessment of the built-in steel spring floating plate rail.