Abstract
This dataset provides a comprehensive collection of vibrational data for the purpose of structural health monitoring, particularly focusing on the detection of bolt loosening in offshore wind turbine jacket foundations. The data set comprises 780 comma-separated values (CSV) files, each corresponding to specific experimental conditions, including various structural states of the wind turbine's support structure. These states are systematically varied considering three main aspects: the amplitude of a white noise (WN) signal, the type of bolt damage, and the level at which damage has occurred. The data were meticulously collected using eight triaxial accelerometers (PCB R Piezotronic model 356A17), strategically placed at different locations on a scaled-down replica of an offshore jacket-type wind turbine. This setup facilitated the acquisition of detailed vibrational data through a National Instruments' data acquisition (DAQ) system, comprising six input modules (NI 9234 model) housed in a chassis (cDAQ model). The white noise signal, simulating wind disturbance at the nacelle, was produced by a modal shaker and varied in three amplitudes (0.5, 1, and 2), directly proportional to the induced vibration in the wind turbine. The dataset uniquely captures the vibrational behaviour under different scenarios of bolt loosening in the turbine's foundation. The conditions include a healthy state (bolts tightened to 12 Nm) and various degrees of loosening (bolts loosened to 9 Nm, 6 Nm, and completely absent), examined at four distinct levels of the turbine's base structure. This granular approach offers a nuanced view of how varying degrees of bolt loosening impact the vibrational characteristics of the structure. The value of this dataset lies in its potential for wide-ranging applications in the field of structural health monitoring. Researchers and engineers can leverage this data for developing and testing new methodologies for early damage detection and progressive damage assessment in offshore wind turbines. The dataset's comprehensive coverage of damage scenarios makes it a valuable resource for the validation and enhancement of existing damage detection algorithms. Furthermore, the dataset can serve as a benchmark for comparing the efficacy of different vibrational analysis techniques in the context of wind turbine maintenance and safety. Its application is not only limited to wind turbines but can extend to other structures where bolt integrity is critical for operational safety. This dataset represents a significant contribution to the field of structural health monitoring, providing a detailed and practical resource for enhancing the reliability and safety of offshore wind turbines and similar structures.