Abstract
Increasing numbers of antennas are being placed inside laptop screen bezels. Connections between antennas and laptop bases have become challenging owing to space limitations. Thus, this paper proposes a flexible low-loss thin flimsy stripline structure for high-speed applications. The cable should be sufficiently thin to avoid causing a water ripple effect while under the screen panel. Furthermore, the cable should be sufficiently flexible to traverse the hinges between the laptop screen and base. This study aims to design a cable with a total thickness of less than 0.6 mm and an insertion loss of less than 10 dB/m at a frequency of 6 GHz. Polytetrafluoroethylene (PTFE), a flexible material, can be used to meet these requirements. We simulate the characteristics of various PTFE layer thicknesses. The trend shows a thicker PTFE layer and lower insertion loss. Finally, we fabricate and test two structures with different thicknesses. Both thicknesses are less than 0.6 mm, and the insertion losses are less than 10 dB/m at 6 GHz. We demonstrate the feasibility of the proposed design and fabrication process for these applications through simulations and measurements.