Abstract
Biogas, produced from anaerobic digestion, is a sustainable and renewable energy source. To upgrade biogas to Bio-CNG, CO(2) must be removed from the raw mixture. Membrane separation is an economical process for the removal of CO(2), and mixed matrix membranes (MMMs) are being explored for CO(2)/CH(4) separation. MMMs are fabricated using techniques such as in situ techniques to overcome research gaps, such as in filler agglomeration and filler-polymer interfaces. In this work, MMMs were fabricated using the in situ growth of ZIF-8 and ZIF-67 in polyethersulfone (PES) and compared with traditional filler dispersion of ZIF-8 and ZIF-67. The fabricated MMMs were characterized and tested for gas permeation using a model biogas. Fourier-transform infrared (FTIR) spectroscopy and Field Emission Scanning Electron Microscopy (FESEM) analysis were conducted to confirm in situ synthesis of ZIF-8 and ZIF-67. CO(2) permeability of in situ ZIF-8 and ZIF-67-based MMMs have enhanced to 84.5 Barrer and 78.8 Barrer, respectively, compared to pure PES membrane, which is around 25 Barrer. Similarly, ZIF-8 and ZIF-67-based traditional MMMs have shown an increase in the CO(2) permeability of 75.6 Barrer and 68 Barrer, respectively. Additionally, the selectivity for CO(2)/CH(4) separation increased for some of the prepared MMMs, demonstrating the effectiveness of the in situ fabrication method.