Abstract
In this paper, a microstrip Wilkinson power divider (MWPD) based on particle swarm optimization (PSO) algorithm is designed, simulated, and fabricated using novel resonators. In addition, attenuators and open-ended stubs are incorporated to generate a broad cut-off band and reduce unwanted harmonics. The proposed power divider has a central frequency of 1 GHz. The performance of each used resonator is analyzed based on lumped-element circuit models.The L and C parameters of the equivalent circuit of the used resonators are predicted and optimized with the assistance of the PSO method. The subsequent phase was the fabrication of the proposed MWPD, after which its performance was evaluated in the light of the results obtained from the simulation. It was discovered that there was a high degree of concordance between the two. On the other hand, the fabricated circuit has several benefits, including a suitable S(12) of - 3.15 dB, a high return loss of less than - 24 dB at the operating frequency, a compact size of 0.058 λg × 0.064 λg , and the ability to remove undesired harmonics. The results show a high level of suppression of the unwanted harmonics (up to the 16th harmonic) and a great responsiveness in the passband, while having very low ripple. As a result, the proposed circuit may be used in a wide variety of electronic devices, such as radar transmitter and receiver circuits, and many other high-frequency systems.