Abstract
Firefighter protective clothing is composed of multiple layers, each serving distinct functions. The outer layer shields the user from fire, chemicals, cuts, body fluids, and water, while also permitting water vapour to escape. The middle membrane layer acts as a thermal and moisture barrier, preventing heat and liquid penetration but allowing vapour diffusion. The inner layer enhances thermal protection and wearer comfort. A nationwide German survey and risk analysis with different fire brigades identified a need for enhanced comfort, reduced physiological heat load, and improved protection against stabs and cuts. Enhanced tear resistance is one proposed method for increased stab and cut protection. Wearer comfort parameters include water vapour permeability, breathability, air permeability, efficient cooling and increased breathability of the protective clothing are crucial for comfort. Sweat is diffused through the jacket due to differing water vapour partial pressures inside and outside the jacket. Enhancing air permeability of the outer layer and reducing the water vapour transmission resistance across the entire layer structure improve cooling by lowering the external water vapour partial pressure, thus facilitating better sweat transport and heat dissipation. To increase breathability and stab- and cut protection, different fabric weaves for the outer layer of a firefighter´s jacket are produced and compared with each other. The Honeycomb and the Huck-a-back fabric achieve better properties than Twill 2/2 fabric used as standard.