Abstract
Because of the possible use of pyrolytic graphite in aerospace vehicles its reaction with oxygen-containing gases is of interest, particularly with respect to chemical anisotropy. Although several authors have found different degrees of reactivity of graphite in different directions they disagree regarding the existence of a temperature coefficient. This disagreement, however, is probably due to investigators studying single crystals in some cases and pyrolytic graphite in others and in some cases different oxidizers. New data for pyrolytic graphite are presented which were obtained by oxidizing in each run several pieces of differing geometry. These together with earlier data show that the rate ratio for the two major directions is temperature dependent with an activation energy difference of about 19 kilojoules (4500 thermochemical calories) per gram atom of carbon reacted. It is shown that this difference in rates probably arises because the relative number of sites available in these directions is sufficiently different to cause a shift in which reaction step is rate-controlling. On the "faces" chemisorption is the rate controlling step followed by rapid decomposition of surface oxides. On the "edges" decomposition is the rate controlling step. This interpretation applied to the data yield 131 kJ/mol for the activation energy of chemisorption and 150 kJ/mol for decomposition (31 and 36 kcal/mol, respectively).